Breda’s Michele Marocchi shows us around the Breda B12i and then hands over to Andrea Magrassi from Nouva Armeria Del Centro who explains the...
Modification, Modified Division Guns, News, Standard Division Guns
A detailed look at mag tube wear issues on the Beretta 1301.
Here's a simple clay swinger that's very durable and costs less than £20 to make. The bearings are about £3 each on eBay and we paid £13 for the...
Guidance for anyone considering modifications to a shotgun loading port, pitfalls and possible methods are discussed.
We were keen to see if premium shells really do give more bang for your (more) bucks, so we got some Gamebore Black Gold in several loads
Removing the hammer from a Beretta 1301 as well as showing the effects and remedy for hammer strut failure.
This covers replacing the hammer in a Beretta 1301 after renewing the hammer struts.
Manageable recoil and an accurate slug round that makes factor in a 24" barrel is a real asset to a practical shotgun competitor.
An introduction to the shotgun rib from Toni System
Beretta Blink bolt pin premature failure after less than 1500 rounds in a new gun
